Contact Us
TEL: +86-755-29799869
E-mail:admin@zdfcard.cn
Address: 5/F, Plant Area of Block A, Hongwei Industrial Estate, Liuxian No.3 Road, Bao,an District, Shenzhen, China
Home > Knowledge > Content
Plastic cards design notes about plastic cards printing
Mar 23, 2018

Card design note:

> Card number : flat number , inkjet number , small embossing number and big embossing number and so on. Embossing number can be gold or sliver color. Please note that the embossing number can not be paralleled with width side. Die cut card can not print embossing number. Matte finished card and frosted finished card can print only do inkjet number and embossed barcode, not flat number.

> If requested metallic silver or gold background please indicate, if there's no special instructions, then we will print the card according to design.

> Thickness of the card: if not specified,we will make all standard thickness (0.76mm).

> There will be color aberration for printing. If there's sample card to follow color, then we will print the card according to it, but it can not be 100% the same. If customer requested strictly for the color and quantity is large and time is enough, it's better to print coated art paper to confirm the print effect first. The quantity is smaller than 10000pcs, it will be put together with other orders in one version to print, color will be control within 10%, the figure is normal.

> There're difference between actual card color and design color on computer. For the same design, it also display difference effect color in different display screen (for example , it will show difference between the LCD screen and CRT screen)

> The line thickness cannot smaller than 0.076mm , or it won’t be clearly after prntied.

> The minimum distance from embossing number to the edge of card is 4-5mm. the width of magnetic stripe is 12 mm , and distance to the edge of card is 4.5mm.

> The size of each letter for small embossing number is 3mm, big embossing number is 4mm.

> Please conver the texts, symbols or picture into curve.

> As the card printing carrier is difference, then the colour of printed card will be some aberration with computer design or the paper draft color printed by printer. It print according to CMYK color and can not be printed according to the computer screen color or color print by printer.

> The Shading and background color can not be less than 8%, in order to avoid it can not display on the card.

> A mold should be set up for the die cut card and the mold will cost little, the delivery time of die cut card will be longer. It also can not print flat number, embossing number, but can print with inject number or inject barcode.

> Embossing number can not be printed vertical , that’s embossing can not runned parallel to the shorten edge, just can be runned parallel to the long edge.